Troubleshooting • Re: Rasberry Pi 4 will display without SD Card but get...
Update: I have done a lot of looking into some codes for the config.txt and added "hdmi_safe=1" under the [ALL] this has generated a square with rainbow after booting with SD card inserted then goes...
View ArticleOff topic discussion • Take a Shot with Nikon & Canon
Take a Shot with Nikon & CanonCanon EOS R3, Canon EOS R5, Canon EOS R6, Canon EOS R7, Nikon Z9, Nikon Z 7II, Nikon Z7 Mirrorless Camera, Nikon D6, Nikon D850, Nikon D780, Sony Alpha A7R III , Sony...
View ArticleGeneral discussion • Bluetooth headset (with mic) on Pi Zero 2W Bullseye
Hi all,I'd like to be able to use a Bluetooth headset (e.g., a gaming headset with earphones and a microphone) on a Pi Zero 2W. The Pi is currently running 64-bit headless Bullseye: "Raspberry Pi OS...
View ArticleRaspberry Pi OS • Re: How to determine when a system was installed?
For those looking to find installation date there is another possibility; When I install a new OS the first thing I do is update/upgrade and install standard apps, so looking in apt logs for the...
View ArticleGeneral • Re: Compatibily uf2 files
OK, with change GPIO21 to GPIO5 all works well !!Thank's for help !Statistics: Posted by yabba235 — Sat Oct 26, 2024 5:37 am
View ArticleAndroid • Re: [DEV] LineageOS 21 (Android 14) for Raspberry Pi 4 & Pi 5
I'm having trouble with TWRP on my CM4 -- the recovery process repeatedly segfaults:Code: console:/ # [ 10.127111] init: starting service 'recovery'...[ 10.132585] init: Created socket...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Using TDM I2S on the 5
The RP1 datasheet? It doesn't say anything of the capabilities wrt TDM. It only points out the Synopsys driver for a "reference implementation", which is why I post the question here, where supposedly...
View ArticleTroubleshooting • Re: Unable to run zinc on the Raspberry Pi 4B using mesa 24
wait,*GL_RENDERER: zink Vulkan 1.3(V3D 4.2.14.0 (MESA_V3DV))*GL_VERSION: 3.3 (Core Profile) Mesa 24.3.0-devel <<<---thought, it was GL_VERSION: 2.1 HW limits.Statistics: Posted by cjan — Sun...
View ArticleSDK • Re: GPIO pin handling on the Pico
That's quite strange of a bus. Although VCC is 5V, it is some kind of open collector working at 3.3 V (bus) - 3.5 V (terminal), with low impedance (200/480 Ohm divider from 5V) and high sink currents...
View ArticleOther • Re: Yocto - Wayland + Weston with GPU support
there's only a few things that effect the rpi51. power source2. sd card/media3. screen4. wireless dongles keyboard/mousewhat i would do,check i'm using the recommend power sourcerun raspberry os...
View ArticleGeneral discussion • Re: USB on pi4 modle b not working
Not sure anyone here can tell you how to fix that.... Best bet would be to allow the Pi to dry out *thoroughly* (such as by putting it in a warm spot with direct sunlight) and only then try powering...
View ArticleRaspberry Pi OS • Re: how to make apt (-install) work again for Stretch?
thank you, but I am quite sure that I never will upgrade my Pi3B running Stretch - too much annoying work to do (considering my few, but now reliably and reproducibly working programs and apps). And...
View ArticleTroubleshooting • Pi 400 Boot and Keyboard broken after 2 days?
I have been using my Pi 400 without issue since I received it on Thursday the 24th. It's the night of the 26th...Tonight I turned it on and it did not boot as normal into my SSD (Pi OS lite). It went...
View ArticleGeneral discussion • Re: New Raspberry Pi Products
The Pi500...probably two of those, but I do hope there is a model that includes the ability to have an internal NVMe SSD (2230/2242 format is fine by me)Raspberry SSD released, Pi500 with SSD...
View ArticleTroubleshooting • Re: I want to use ky-013 for raspberry pie pico.
are (A) and (B) different?The main difference is the number. If using 26, the pin is initialized to high-Z.The docs * say:The argument of the constructor ADC specifies either a Pin by number, name of...
View ArticleTroubleshooting • Re: Pi 400 Boot and Keyboard broken after 2 days?
tried a clean install of desktopStatistics: Posted by kerry_s — Sun Oct 27, 2024 5:53 am
View ArticleGeneral discussion • Re: raspberry pi 5 acpi bios error
The most obvious problem could be that the RPi 5 does not have an ACPI BIOS, so it sounds like Windows is looking for something which doesn't exist in the hardware. That sounds like a possible problem...
View ArticleAdvanced users • Re: Pi-Hole No Router Access
I contacted the ISP and they informed me I can put in my own router. They said the network is managed and that I would need to call them to clear the connection before I plug in my router. So I think...
View ArticleTroubleshooting • Re: Pi 4B not returning the correct vcgencmd results
When I add the line program_usb_boot_mode=1that option is only valid on the pi3, and has zero effect on the pi4Anyone else have this problem? And what's the solution?use "rpi-eeprom-config --edit" and...
View ArticleTroubleshooting • how to force rpi3 (Bookworm) to output 1080p?
my monitor is 1080p. rpi3 refuses to output 1080p over HDMI upon reboot or from cold start On.if i go into Preference, i can change resolution to 1920x1080, hit Apply, and that works. BUT off course,...
View Article