I finally worked up the courage to just go at the stand-off posts with pliers. They were easier to remove than I expected. Grab firmly, rock back and forth gently, just a little, and they pop out. If you're gentle enough, the metal back should not bend, mine did a bit, but I pressed it back pretty flat. It leaves a little bit of the rivet in the hole (like a sliver of metal) that should be removed if possible (tape, tweezers, etc.).
Statistics: Posted by mlepage — Sat Mar 01, 2025 1:00 am
/fit-in/580x348/filters:format(webp)/english-betterindia/media/media_files/2026/08/04/4-2026-08-04-18-31-45.png)
/pic9729642.png)
